Page 11
5. Operation
1
2
1
2
1
2
Gently press and the knob
will pop out.
Turn the oven functions
selection knob to the
desired function.
Symbols printed around the knob indicate
available oven functions.
In ovens equipped with the electronic programmer, the time “
” will start flashing in the display field
upon connection to the power supply.
The programmer should be set with the current time. (See “Electronic Programmer”).
NOTE:
If the current time is not set, the oven will not operate.
The electronic programmer is equipped with electronic sensors which are switched on by touching or pressing
the sensor surface for at least one second.
Each sensor reaction is confirmed by a beep sound. Keep the sensor surface clean at all times.
WARNING
To avoid burns, ensure oven chamber has cooled down sufficiently.
If your oven is equipped with retractable knobs. In order to select a function do the following:
Before First Use
• Remove packaging, clean the interior of the oven with warm water and a little washing-up liquid.
• Take out and wash the oven fittings with warm water and a little washing-up liquid.
• Ensure there is sufficient ventilation in the room, or open a window.
• Heat the oven (to a temperature of 250°C, for approximately 30 minutes), allow it to cool, then remove any
stains and wash carefully.
