7
When inserting drawers: Place back edge of drawer on rails mounted in cabinet.
Hold drawer horizontal and push inwards until it locks into place. Carefully pull drawer out to
check it is locked. Repeat if necessary.
Fitting/removing internal shelves
The internal shelves are attached by Velcro on their rails. To remove, pull shelf
out completely, pull front up and towards you.
When replacing, pull both rails out as far as they will go. Check that the tabs at the back of each
rail are engaged with the runners on the shelf. Push rails all the way before placing shelf on front
edge. This is to ensure shelf is straight.
Remove the covering on the side of the drawer.
The front of the drawer is adjusted laterally
right/left. A turn to the left will move the drawer
1 mm to the left. Adjust both sides of drawer if
necessary.
Height adjustment
Tilt adjustment
Vertical adjustment of the front. Make sure
that the magnetic gasket seals adequately.
The height can be ad/- 2mm
Side adjustment
Summary of Contents for Norcool Cave 55
