SCAN DSA 6 & 7-5
1
Regulation for primary air.
Push the button sideways. Left position is closed and right
position is open. The primary air is used when lighting and
refuelling the stove. It should always be closed during conti-
nuous firing.
2
Regulation for combustion air.
Push the button sideways. Left position is closed and right
position is open. The air is used for the combustion and regu-
lates the output of the stove.
3
Productionnumber
SCAN DSA 7-5
Combustion air
Ceramic smoke deflectors
SCAN DSA 6
Ceramic smoke deflectors
Lift up the lower ceramic smoke deflector, pull out the pins in the
lateral combustion chamber plates, and remove the deflector. The
upper deflector is removed in the same way.
Clean combustion
The SCAN DSA insert uses the "CB technique" (Clean-Burn) to
ensure an optimally clean combustion. The extra combustion air
is preheated and led into the combustion chamber close to the
ceramic smoke deflector.
You should read this manual as well as the
General Instructions for Inatallation
before beginning the installation.
Closed
Open
2
1
3
2
2
1
1
