You should read this manual as well as the
General Instructions for Installation
before beginning the installation.
1
5
5
2
3
3
4
4
6
Combustion air
Push the handle (fig. 1, 7) to the right in order to open
and to the left in order to close. The air is used for the
combustion and regulates the efficiency of the stove.
Cleaning of the glass
If you need to clean the glass, the door can be opened
in the following way:
IMPORTANT!
Close the door and lock it by turning the
locking button (see "Opening of the door") before
you begin.
In order to protect the ceramic gasket at the bottom of the
door, you should place the distance piece (fig. 3) under
the door in the left side. Put a 6 mm hexagon spanner
in the hole of the right side of the door (fig. 4) and turn
clockwise. Swing out the door, clean the glass and close
the door. Turn the screw counter-clockwise and remove
the dis- tance piece.
Ceramic smoke deflector
After the chimney has been swept, you have to remove the soot that
has fallen down onto the ceramic smoke deflector. Lift up the deflector
in one side and tilt it down in the other side so that the soot falls into
the combustion chamber. Attention! The smoke deflector is made of
Skamol, which is a delicate material that easily breaks, so take care
when handling it.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
6:1
6:2
2
1
SCAN DSA 1
Accessories
For the built-in insert you can have the following acces-
sories:
For the free-standing model you can have the following
accessories:
• Support
frame
• Damper for the regulation of the chimney draught
• Ventilator
• Front plate at the door (steel or soapstone)
• Cover for the elbow
• Ventilator
• Shaped floor plate (steel or glass)
• Connection piece for fresh-air intake
7
7
