7
Warning
• Keep your children from using the cooker hood.
• Your cooker hood is for domestic use only, not suitable for
barbecue, roast shop and other commercial use.
• Any installation work must be carried out by a qualified
electrician or competent person.
• The cooker hood and its filter mesh should be cleaned regu-
larly in order to keep in good working order.
• Before cleaning, always ensure that you have switched your
cooker hood off.
• Clean the cooker hood according to the instruction manual
and keep the cooker hood from the danger of burning.
• No fire for drying your cooker hood.
• If there is any fault with your cooker hood, please call the
service department appointed by agent for servicing.
• Please keep the room draughty when your cooker hood and
gas hob are working.
• Do not exhaust the gas from cooker hood through the same
heated flue which is for the gas from gas hob and other
kitchen appliances.
• Before installation and usage, read all the instructions and
make sure that the voltage (V) and the frequency (Hz)
indicated on your cooker hood are exactly the same as the
voltage (V) and the frequency (Hz) in your home.
• In order to get the most out of your cooker hood, please
read the instruction manual before installing & using, and
keep it in a safe place.
• Ensure that you could get our guarantee for your cooker
hood, please provide the warranty card and purchase re-
ceipt, or the guarantee will not be offered.
Function and Feature
• The cooker hood is made of high quality materials with
streamlined design accordingly to technical and physical
engineering theory, high end and luxury with age aesthetic
feeling, also there are kinds of styles for your option to
perfect your kitchen.
• Equipped with a large power low noise electric motor and
centrifugal leaf, it produces strong suction, low noise, non
stick grease filter and easy to clean.
• With the isolated low voltage circuit board control, 12vAC
input, the lights are more concentrative and use is much
safer.
• The grease filter is easy to remove and clean, and only wipe
lightly for the motor and other interior parts.
• Special wind tunnel construction and oil collector design,
avoiding redundant grease left in the flue.
Installation
1 The cooker hood
should be placed at a
distance of 65 - 75cm
from the cooking
surface for thebest
effect. See Pic.1.
2 Install the hook on a
suitable place once
the installation height
is fixed, and keep
it in line. The fixed
position of the inside
chimney bracket is
the highest position
of inside chimney.
See Pic.2.
3 Fix the extensible pipe and then put the cooker hood on the
hook. See Pic.3.
4 Fix the outside chimney by outside chimney bracket with
screw. Here should be sure the chimney can be adjusted
freely then put them into the hood. Finally, drag the alu-
minum foil pipe to the outside of window. See Pic.4.
5 Pull the inside chimney into the position of the inside chim-
ney bracket then fix it by screw. See Pic.5.
Note:
• Any installation work must be carried out by a qualified
electrician or Competent person.
• Do not connect the ducting system of the hood to any exist-
ing ventilation system which is being used for any other
appliance, such as warmer tube, gas tube, hot wind tube.
• The angle of the bend of the ventilation pipe should not
be less than 120º. You must direct the pipe horizontally, or,
alternatively, the pipe should go up from the initial point
and should be led to an outer wall.
• After the installation, make sure that the cooker hood is
level to avoid grease collection at on end.
