ISOLATORS-EX
MP37129
ZP90829-6
11
EN
An example of the label affixed to the SWITCH-DISCONNECTOR is shown here below:
TÜV IT 14 ATEX 006
Ex tb IIIC T80°C Db Ta -25°C to + 40°C
IP65
IP65
IP65
2014
2014
2014
Ex tb IIIC T90°C Db Ta -25°C to + 60°C
TÜV IT 14 ATEX 006
Ex tb IIIC T80°C Db Ta -25°C to + 40°C
Ex tb IIIC T90°C Db Ta -25°C to + 60°C
TÜV IT 14 ATEX 006
Ex tb IIIC T80°C Db Ta -25°C to + 40°C
Ex tb IIIC T90°C Db Ta -25°C to + 60°C
590.XHGE2002:
SWITCH-DISCONNECTOR in 20A enclosure
TÜV IT 14 ATEX 006
Ex tb IIIC T80°C Db Ta -25°C to + 40°C
IP65
IP65
IP65
2014
2014
2014
Ex tb IIIC T90°C Db Ta -25°C to + 60°C
TÜV IT 14 ATEX 006
Ex tb IIIC T80°C Db Ta -25°C to + 40°C
Ex tb IIIC T90°C Db Ta -25°C to + 60°C
TÜV IT 14 ATEX 006
Ex tb IIIC T80°C Db Ta -25°C to + 40°C
Ex tb IIIC T90°C Db Ta -25°C to + 60°C
590.XHGE6302:
SWITCH-DISCONNECTOR in 63A enclosure
TÜV IT 14 ATEX 006
Ex tb IIIC T80°C Db Ta -25°C to + 40°C
IP65
IP65
IP65
2014
2014
2014
Ex tb IIIC T90°C Db Ta -25°C to + 60°C
TÜV IT 14 ATEX 006
Ex tb IIIC T80°C Db Ta -25°C to + 40°C
Ex tb IIIC T90°C Db Ta -25°C to + 60°C
TÜV IT 14 ATEX 006
Ex tb IIIC T80°C Db Ta -25°C to + 40°C
Ex tb IIIC T90°C Db Ta -25°C to + 60°C
590.XHGE3202:
SWITCH-DISCONNECTOR in 32A enclosure
THIS DOCUMENT MUST BE READ CAREFULLY BEFORE INSTALLATION
These instructions are intended for:
expert electricians or appropriately trained personnel.
1. SAFETY INFORMATION
The ISOLATORS-EX Series switch-disconnectors in metal enclosures are used for fixed installation in environments with a potential
risk of explosion, due to the presence of combustible dust, classified as zone 21. The installation, use and maintenance instructions
must be kept in a safe place for future reference. During operation or maintenance jobs on the device, doe not leave this manual
or other objects inside the enclosure. Use the ISOLATORS-EX Series switch-disconnectors in metal enclosures for their approved
use only, keeping them completely intact and clean. The ISOLATORS-EX Series devices are designed to withstand shocks of 7J,
and to be used under normal vibration conditions. They are not designed for use in environments subject to extreme vibrations.
The enclosure is made of die-cast aluminium alloy. The type of protection cannot be guaranteed if the product is not installed
correctly. Use only original spare parts supplied by SCAME. No modification/work is allowed on the switch-disconnector in metal
enclosure unless specifically indicated in this manual.
Always comply with national accident-prevention rules and with the safety instructions contained in this manual whenever
you work on the device.
2. COMPLIANCE WITH STANDARDS
The switch – disconnectors in enclosure of series XHGE and XHEM are intended for use in Zone 21 and 22, in compliance with
the provisions of Directive 2014/34/EU:
EN 60079-0:2018
EN 60079-31:2014
Summary of Contents for ISOLATORS-EX 20A
Page 45: ...ISOLATORS EX MP37129 ZP90829 6 45 BG 1 46 2 46 3 47 4 48 5 50 1 20 32 40A 2 63A mm mm...
Page 66: ...ISOLATORS EX MP37129 ZP90829 6 66...
Page 67: ...ISOLATORS EX MP37129 ZP90829 6 67...
Page 68: ...SCAME PARRE S p A VIA COSTA ERTA 15 24020 PARRE BG ITALY TEL 39 035 705000 FAX 39 035 703122...