2
Connecting the Camera
You can set up and operate the D7-180 and D7-XR Cameras using a
standard JavaScript-enabled browser on Windows 7 or Windows 8.
PoE Operation
The camera can be connected
over a network by a CAT-5 Ether-
net cable plugged into the rear of
the camera. If the network sup-
ports PoE, power is supplied di-
rectly via the Ethernet cable. The
camera can also be powered by
a 12volt power supply that is in-
cluded if the network does not
support PoE.
Ethernet
connection
12V DC plug
Audio
connection
(not yet supported)
Two O-rings have been
included to aid in
installations, if needed.
The O-rings are intended to
secure the screws before
attaching the camera to
the wall mount. Insert the
screw into the mounting holes
at the top and bottom of the camera. Rolling the
O-ring over the tip of the screw will hold it in
place allowing for easier installation.