4
5
Step 6
Open up the table frame assembly. Tighten lever on both sides of frame.
Lock the brake of center hinge. Lock the brake of casters.
1-1
Pull out, rotate, release
plunger-lock.
1-2
Rotate allowing plunger-lock
to engage.
2-1
Push release button in to
Lever-Lock.
2-2
Rotate clockwise to tighten.
Press & rotate to reposition
lever-lock.
*** Use caution - Spring assembly
is very strong.
*** Make sure to push weight
down and keep the top flat.
1-2
1-1
2-2
2-1
*** Level-Lock available only on
NOMAD 12’ model.
(Not installed on NOMAD
Sport or NOMAD 10’)
Step 4
Fold the frame assembly. And install shoulder bolts to connect legs with cross
bars.
Legs should be connected with cross bars from the opposite side.
Step 5
Flip the assembly over to make it stand.
