![background image](http://html1.mh-extra.com/html/scag-power-equipment/turf-tiger-stt61v-25kbd-ss/turf-tiger-stt61v-25kbd-ss_operators-manual_1205781016.webp)
12
3.4 CUTTER DECK
Type: .......................................................................................... Floating, Adjustable, Anti-scalping, Hybrid Design Combines
Out-front and Belly-mount Designs
Construction: ............................................................................. 10-gauge steel reinforced with 7-gauge (3/16") Support Plate.
7-gauge (3/16") deck skirt.
True Cutting Width: .................................................................. 61" (155.0 cm)
Cutting Height Adjustment: ....................................................... Foot Operated Lever Adjustment from Operator's Seat, 1.00" to
6.00" in 1/4"increments
Cutter Blades: ............................................................................ .197 Thick, Milled Edge, Wear Resistant Marbain™
SMT 61V: Three (3) 21" blades
Blade Engagement: ................................................................... Electric Blade Engagement Clutch with Control Panel Switch
Connected to the Cutter Deck Gearbox through a Drive Shaft.
Discharge Opening: ................................................................... Extra Wide 11.5" Discharge Opening with Spring Loaded
Discharge Chute
Discharge Chute..................................................................................Black, Polypropylene (Plastic), Flexible
Caster Wheels: .......................................................................... 13 X 6.00 Four-Ply
Spindles: .................................................................................... Heavy-duty 1-1/8" Top Dimension Spindle Shaft, Cast Housing,
Taper Roller Bearing, Low Maintenance with Top Access Grease
Fitting and Grease Overfill Relief Poppet
Spindle Pulleys: .......................................................................... Split Steel with Easily Removed Taper Hubs
Cutter Deck Belts: .................................................................... B-section with Kevlar Cord. Self-adjusting, Self-tightening
SMT61 .................................................................................. Scag Part Number - 481558
Electric Clutch Type ................................................................. Ogura Electric Clutch
Drive Shaft ................................................................................. Clamp Yoke Shaft With Two High Speed U-Joints
3.6 HYDRAULIC SYSTEM
Hydraulic Oil Filter ..................................................................... 10 Micron Spin-on Element Type
Hydraulic Reservoir ................................................................... Nylon; 3 Quart Capacity
3.7 WEIGHTS AND DIMENSIONS
SMT61V
Length
87.5"
Tracking Width
55"
Overall Width
73.5" w/chute down, 62" w/chute up
Overall Height
67.5" w/ROPS up, 56.5" w/ROPS down
Operating Weight
1540#
Section 3
3.8 PRODUCTIVITY
The following chart will aid you in determining how many acres your Scag mower will cut per day.
The chart is an estimate based on 8 hours per day cutting time at 6 MPH with an allowance for overlap and turns.
Cutting Width:
61"
Acres Per Day:
23.7