
6
Section 2
R
22. Keep hands and feet away from all other moving
parts. Contact can injure.
23. Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
24. NEVER leave the machine running unattended.
2.5 MAINTENANCE CONSIDERATIONS &
STORAGE
1. Check impeller on a regular basis for bent, worn,
or cracked blades. Only replace impellers. Do not
straighten or weld the impeller fan.
2. Never make adjustments to the machine with the
engine running unless specifically instructed to do
so. If the engine is running, keep hands, feet, and
clothing away from moving parts.
3. Disconnect spark plug wire(s) to prevent
accidental starting of the engine when servicing
or adjusting the machine. Wait for all movement to
stop before adjusting, cleaning, or repairing.
4. Keep all nuts, bolts, and screws tight, especially
the impeller bolt, to ensure the machine is in safe
working condition.
5. Do not change the engine governor settings or
overspeed the engine. See the engine operator's
manual for information on engine settings.
6. To reduce fire hazard, keep the muffler and engine
free of grass, leaves, excessive grease, oil, and
dirt.
7. Store the machine on level ground.
8. NEVER allow untrained personnel to service the
machine.
9. Keep all parts in good working condition. Replace
all worn or damaged decals.
10. Use jack stands to support components when
required.
11. Let the engine cool before storing.
12. Keep the unit locked in a secure location and
disconnect the battery to prevent unauthorized
personnel, especially children, from playing and/or
tampering with the unit.
13. DO NOT store the machine near an open flame.
14. Always follow the engine manufacturer's
recommendation for storing and returning to
service.
15. Shut off fuel while storing or transporting.
2.6 USING A SPARK ARRESTOR
The engine on this machine may not be equipped with
a spark arrestor muffler. It is in violation of California
Public Resource Code Section 4442 to use or operate
this engine on or near any forest covered, brush covered,
or grass covered land unless the exhaust system is
equipped with a spark arrestor meeting any applicable
local or state laws. Other states or federal areas may have
similar laws. Check with your state or local authorities for
regulations pertaining to these requirements.
2.7 SPARK IGNITION SYSTEM
This spark ignition system complies with Canadian
ICES-002.