Scag Power Equipment TLS20-18BV, Operator'S Manual

Page: 14 / 31

10
R
Section 4
CAUTION
Do not attempt to operate this machine unless
you have read this manual. Learn the location and
purpose of all controls and instruments before
you operate.
4.1 CONTROLS AND INSTRUMENT
IDENTIFICATION
Before operating the truck loader, familiarize yourself with
all truck loader and engine controls. Knowing the location,
function and operation of these controls is important for
safe and efficient operation.
OPERATING INSTRUCTIONS
1. Ignition Switch (Figure 4-1).
The ignition switch
is used to start the engine and has three positions;
OFF, ON, and START.
2. Engine Throttle Control (Figure 4-1).
Used to
control the engine speed. Pushing the lever down
increases engine speed. Pulling the lever up
decreases engine speed. Full up position is the IDLE
position.
3. Engine Choke Control (Figure 4-1).
Used to start
a cold engine.
4. Fuel Shutoff Valve (Figure 4-1). Located under the
fuel tank. Used to shut off fuel supply to the engine.
Rotate the valve counter clockwise to supply fuel.
Rotate the valve clockwise to shut off fuel supply.
INTAKE HOSE
BOOM ASSEMBLY
FUEL SHUTOFF
VALVE
IGNITION
SWITCH
ENGINE CHOKE
CONTROL
ENGINE
THROTTLE
CONTROL
Figure 4-1. Controls and Instruments - TLH Model Shown