12
Sección 3
3.3 TRACTOR (CONTINUACIÓN)
Tanques de combustible....................................................................
Dual de 4.5 galones, de polietileno, sin costuras, con gran abertura
y tapa de combustible
Presión de la llanta:
Rueda libre delantera
.............................................................Llantas macizas
Motriz....................................................................................
12
PS
I
Asiento......................................................................................
Acolchado, cojín grueso con apoyo adicional de resortes
V elocidad de desplazamiento:
Adelante
................................................................................0-10 MPH (0-16 Kph)
Reversa..................................................................................
0-5 MPH (0-8 Kph)
3.4 PLATAFORMA DE COR
TE
Tip
o:...........................................................................................
Flotante, ajustable, anti raspado, de diseño híbrido que combina
diseños delantero y de montaje frontal
Construcción:......................................................................................Construcción de plataforma de triple placa, la parte superior de la
plataforma consta de tres placas de acero que totalizan casi 1/2" de
acero, faldón de plataforma calibre 7 (3/16").
Ancho de corte:.........................................................................
52" (132.0 cm), 61" (155.0 cm)
Ajuste de altura de corte:.................................................................
Ajuste con palanca de pie desde el asiento del operador, desde
1.50" a 5.5" en incrementos de 1/4"
Cuchillas de corte:...............................................................................Grosor 0.197, borde cepillado, material Marbain™ resistente al
desgaste
Accionamiento de las cuchillas:.......................................................Embrague eléctrico de accionamiento de cuchilla con interruptor de
panel de control conectado a la plataforma de corte mediante una
correa.
Abertura de descarga:........................................................................Abertura de descarga extra ancha con tolva de descarga cargada
por resorte Tolva y Deflector turbo
Ejes:............................................................................................
Servicio pesado, 1-1/8" en la parte superior, cuerpo fundido,
rodamiento de rodillos cónicos, bajo mantenimiento con conexión
de grasa en la parte superior y cabezal móvil de alivio de exceso de
grasa
Poleas del eje:.............................................................................
Acero partido con cubos cónicos de
fácil desmontaje
Correas de
la plataforma
de corte:
..............................................Sección B, de Kevlar Auto ajustado, auto apreta
do
Tipo embrague eléctrico.............................................................
Embrague PTO de servicio pesado Ogura
3.6 SISTEMA HIDRÁULICO
Filtro de aceite hidráulico...........................................................
Tipo roscado (spin-on) de 10 micras
Depósito hidráulico
....................................................................Nylon; capacidad 2-1/2 cuartos
3.7 PRODUCTIVIDAD
La tabla siguiente lo ayudará a determinar cuántos acres cortará su cortacésped Scag por día.
La tabla es un estimado basado en un tiempo de corte de 8 horas por día, a 11 KPH, con una cuota de 20% para traslape y giros.
Ancho de corte:
52"
61"
Acres por día:
20.2
23.7
-N
OTA
-
La máquina se desplazará a 10 Mph (16 Kph) para fines
de transporte. Para un mejor desempeño de corte, la
velocidad de desplazamiento hacia adelante debe
ajustarse en función de las condiciones de corte.
Summary of Contents for STWC61V-25KA-LC
Page 42: ...38 R Section 7 NOTES...
Page 74: ...70 R Section 8 Notes...
Page 77: ...Secci n 7 39 Notas...