29
R
Section 6
C. 4-3/4" or 5-1/4" Position - (See Figure 6-9). Placing
the baffle in either the 4-3/4" or 5-1/4" setting will
enhance fall cutting (leaf pickup) and reduce cutter
deck "blowout".
To adjust the Custom-Cut Baffle height:
Place the cutter deck in the transport position.
1.
Remove the hardware securing the Custom-Cut
2.
Baffle to the cutter deck.
- NOTe -
Hardware location used in the illustrations are for
reference only. Location of hardware may vary
depending on cutter deck size.
Move the Custom-Cut Baffle to desired position. See
3.
Figure 6-9.
Reinstall the mounting hardware. Torque hardware to
4.
39 lb-ft.
1 2
34
A
B
1 2
3 4
A
B
Custom-Cut Baffle Adjustment
Mounting Slot Selected
Mounting Hardware Location
Slot “A”
Hole 1
Hole 2
Hole 3
Hole 4
Height (inches)
3-3/4”
4-1/4”
4-3/4”
5-1/4”
Slot “B”
Hole 2
Hole 3
Hole 4
Height (inches)
3-1/2”
4”
4-1/2”
7-Position Custom-Cut Baffle Adjustment
Figure 6-9.
