![background image](http://html1.mh-extra.com/html/scag-power-equipment/str-operators/str-operators_manual_1205876011.webp)
7
3.3 TRACTOR (CONT'D)
Travel Speed:
Forward ................................................................................ 0 - 7.5 MPH
Reverse ................................................................................. 0 - 3.5 MPH
3.4 CUTTER DECK
No. of Blades ............................................................................. 2
Width of Cut .............................................................................. 48"
Cutter Blades ............................................................................. Two (2) 24-3/4" Blades, 1/4" thick, milled edge, 5150 Alloy Steel
Deck Drive ................................................................................. Belt Driven Electric Clutch Connected to a Drive Shaft to a
Gearbox Arrangement on the Cutter Deck
Electric Clutch Type .................................................................. Warner “Mag Stop” Electric Clutch
Cutting Height Adjustment ....................................................... Four Corner Pin Adjustment, 1" to 4-1/2" in 1/2" increments
Deck Tilt .................................................................................... Manually by Lifting Deck and Engaging Two Prop Rods
Drive Shaft ................................................................................ Quick-Disconnect Shaft With Two High Speed U-Joints
3.5 GRASS CATCHING SYSTEM
Type ........................................................................................... Out-Front Rear Deck Discharge into Blower which Discharges
the Grass Clippings Either into a Hopper or is Side-Discharged
out to the Lawn
Hopper ....................................................................................... 6-Gallon Molded Plastic with Osolating Discharge Chute
Discharge Blower ...................................................................... 12" Diameter
Side Discharge ........................................................................... Integral with System. Lever Switches Blower Output to Either
Side Discharge or Hopper Discharge
3.6 HYDRAULIC SYSTEM
Hydraulic Oil Filter ................................................................... 10 Micron Spin-on Element Type
Hydraulic Reservoir ................................................................... High Density Polyethylene; _____Capacity
3.7 WEIGHTS AND DIMENSIONS
Length ........................................................................................ 95.0"
Tracking Width ......................................................................... 42.0"
Overall Width ............................................................................ 48.0"
Overall Height ........................................................................... 44.0"
Operating Weight ...................................................................... 1160 lbs.
Section 3