background image

If incorrectly used, this machine can cause severe injury.  Those who use and maintain

the machine should be trained in its proper use, warned of its dangers, and should read

the entire manual before attempting to set up, operate, adjust or service the machine.

LIMITED WARRANTY-COMMERCIAL EQUIPMENT

Any part of the Scag commercial mower manufactured by Scag Power Equipment and found, in the reasonable judgment of

Scag, to be defective in materials or workmanship, will be repaired or replaced by an Authorized Scag Service Dealer without

charge for parts and labor.  This warranty is  limited to the original purchaser and is not transferable.  Proof of purchase will

be required by the dealer to substantiate any warranty claims.  All warranty work must be performed by an Authorized Scag

Service Dealer.

This warranty is limited to the following specified periods from the date of the original retail purchase for defects in materials

or workmanship:

* Wear items including drive belts, blades, hoses and tires are warranted for 90 days.

* Batteries are covered for 90 days.

* Frame, deck, and structural components including oil reservoir, fittings, and oil cooler are

warranted for 1 year.

* Engines and electric starters are covered by the manufacturer’s warranty period.

* Drive system components are warranted for 1 year by the component manufacturer, in

conjunction with Scag Power Equipment.  (Excluding fittings, hoses, cooling system, oil

reservoir, drive belts).

* Electric clutch components are warranted for 1 year.

Any Scag product used for rental purposes is covered by a 90 day warranty.

The Scag mower, including any defective part must be returned to an Authorized Scag Service Dealer within the warranty period.

The expense of delivering the mower to the dealer for warranty work and the expense of returning it to the owner after repair

will be paid for by the owner.  Scag’s responsibility is limited to making the required repairs  and no claim of breach of warranty

shall be cause for cancellation or rescission of the contract of sale of any Scag mower.

This warranty does not cover any mower that has been subject to misuse, neglect, negligence, or accident, or that has been

operated in any way contrary to the operating instructions as specified in the Operator’s Manual.  The warranty does not apply

to any damage to the mower that is the result of improper maintenance, or to any mower or parts that have not been assembled

or installed as specified in the Operator’s Manual and Assembly Manual.  The warranty does not cover any mower that has

been altered or modified, changing performance or durability.  In addition, the warranty does not extend to repairs made

necessary by normal wear, or by the use of parts or accessories which, in the reasonable judgment of Scag, are either

incompatible with the Scag mower or adversely affect its operation, performance or durability.

Scag Power Equipment reserves the right to change or improve the design of any mower without assuming any obligation to

modify any mower previously manufactured.

All other implied warranties are limited in duration to the one (1) year warranty period or ninety (90) days for mowers used for

rental purpose.  Accordingly, any such implied warranties including merchantability, fitness for a particular purpose, or

otherwise, are disclaimed in their entirety after the expiration of the appropriate one year or ninety day warranty period.  Scag’s

obligation under this warranty is strictly and exclusively limited to the repair or replacement of defective parts and Scag does

not assume or authorize anyone to assume for them any other obligation.  Some states do not allow limitations on how long

an implied warranty lasts, so the above limitation may not apply to you.

Scag assumes no responsibility for incidental, consequential or other damages including, but not limited to, expense for

gasoline, expense of delivering the mower to an Authorized Scag Service Dealer and expense of returning it to the owner,

mechanic’s travel time, telephone or telegram charges, rental of a like product during the time warranty repairs are being

performed, travel, loss or damage to personal property, loss of revenue, loss of use of the mower, loss of time or inconvenience.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion

may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

WARNING:

!

Summary of Contents for STHM







































Reviews: