SCADAmetrics EtherMeter EM-100, Installation, Operation And Maintenance Manual

Page: 13 / 79

11
H. Environmental Considerations and Cautions
The following is a list of environmental considerations that will help ensure safe and efficient operation of your
EtherMeter:
• Do not position the EtherMeter near high-powered radio transmitters or electrical equipment, such as
electrical motors or air conditioners. Interference from electrical equipment can cause intermittent failures.
• Do not install the EtherMeter in areas where condensation, water, or other liquids may be present. These
may cause safety hazards and equipment failure.
I. FCC Class A Notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual,
it may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the interference at his own
expense. Modifications: Any modifications made to this device that are not approved by SCADAmetrics may void
the authority granted to the user by the FCC to operate this equipment.
Report:
http://scadametrics.com/PDF/EMC26372-FCC.pdf
J. ICES Notice (Canada)
This Class [
1
] digital apparatus complies with Canadian ICES-003.
Report:
http://scadametrics.com/PDF/EMC26372-IC.pdf