-
Bluetooth Mode for music streaming
Prior to using your Speaker under Bluetooth mode, you will need to pair it with a Bluetooth-enabled
device, e.g. your mobile phone, music player or PC/laptop.
After switching power on, the speaker will have emit a tone and the blue indicator light will flash
consecutively which indicates the Bluetooth function is available.
The pairing procedures are specific for different mobile phone models and brands. Please refer to your
mobile phone’s user manual for further information.
The general pairing procedure is as follows:
1. Make sure the mobile phone and the speaker are within Bluetooth range (i.e. not more than 10 meter
apart).
2. Activate your mobile phone’s Bluetooth function and set your mobile phone to search for Bluetooth
devices. After the search is completed, select the “SCABT” from the Bluetooth device list.
3. You can now enjoy your music with the speaker by controlling the music via your music player and
with the volume being adjusted on the speaker’s volume buttons.
Note:
1.
The Bluetooth speaker will only sync with one device at any time, the connection cannot be
deleted when matching. It can only be deleted in disconnection mode.
2.
A Bluetooth connection list cannot have two devices with the same name. This will cause one of
the two devices to fail to connect via Bluetooth.
3.
When playing music on some mobile phones, the music will be transmitted to the mobile
phone’s speaker instead of the portable speaker. You have to select “transmit the sound via
Bluetooth” in the settings menu and then choose “SCABT” as speaker device. The music will be
transmitted to the speaker. Please refer to your mobile phone’s user manual for further
information.
4.
Some smart phone’s and music players do not have smooth cache, this will cause a slight “POP“
tone when paused. This is a normal sound.
5.
If Bluetooth pairing fails, delete other Bluetooth devices in the connection list, restart speaker
and try again.
6.
The disconnection of Bluetooth is not immediate and will take a few seconds delay to fully
disconnect from the smart phone.
-
Making and Answering Phone Calls
