5. HANDLEBAR ASSEMBLY
The Handlebar is detached from the bike for shipping purposes.
Some assembly is required.
Follow below steps to assemble:
1. Take off the top cap of the handlebar clamp by unscrewing the bolts
with Allen key; (see photo)
2. Put the Handlebar on the clamp and put the top cap on, then screw
the bolts in.
Handlebar Clamp
Bolts
3. Ensure the brake levers face the front of the bike, adjust the handlebar
to a comfortable position then tighten the bolts.
NOTE:
1. Pay attention to the direction of the handlebar and brake hoses
before assembling.
2. Tighten bolts gradually, one at a time. Take care not to over tighten.
· 4 ·
Summary of Contents for Mini Moto-X
Page 30: ...29 ELECTRICAL 25...
