4
SETUP AND OPERATION INSTRUCTIONS
• Ensure dash surface and inside the windscreen are clean and
free from any residue before installation. This includes plastic
and upholstery "protectants", as these may react with the
supplied sticky pad. PLEASE DO NOT USE ANY CLEANING
CHEMICALS ON THE HUD UNIT. If cleaning is required use a
soft microfiber style cloth to wipe clean.
• Place the anti-slip mounting pad on the clean section of your
dash ensuring the dimples are facing upwards.
• Ensure cable is routed safely so there are no obstructions to
operating the vehicle.
• Plug unit into accessory socket and press the power on
button, ensuring the vehicle is outside and not under cover.
• Stick the transparent film onto a suitable position on the
windscreen so the HUD image is projected onto this film,
enabling a clear forward view of the speed display from the
driver's seat position. (See page 9 for more detailed instructions).
• The transparent film serves 2 purposes; reflecting a sharp,
white LED image that isn't effected by the windscreen
lamination. It also prevents the white LED light shining
forward through your windscreen. For best results please
ensure the transparent film is installed prior to operating the
vehicle.
• If you wish to see the HUD display directly face the display
towards you and reverse the speed display in the settings.
• When connecting to power for the first time the satellite icon
will flash red. Once the GPS signal is found it will turn solid
green ready to use. This can take between 30 seconds to 1
minute.
