1
2
PARTS LIST:
WARRANTY
This product is guaranteed against defects for a period of 12 months from date of
purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395
124 (Supercheap Auto) of 751 Gympie Rd Lawnton QLD 4501 Ph (07) 3482 7500.
Supercheap Auto will offer a repair, replacement product or store credit if the product
is assessed as being defective during the warranty period.
To claim under this warranty, take this product to the Front Service Desk of your nearest
Supercheap Auto store. For store locations, visit www.supercheapauto.com.au (AUS)
or www.supercheapauto.co.nz (NZ). You will need your receipt or proof of purchase.
Additional information may be requested of you to process your claim. Should you not
be able to provide proof of purchase with a receipt or a bank statement, identification
showing your name, address and signature may be required to process your claim.
This product may need to be sent to the manufacturer to assess the defect before
determining any claim. Faults or defects caused by product modification, misuse and
abuse, normal wear and tear or failure to follow user instructions are not covered under
this warranty.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Any expenses incurred relating to the return of this product to store will normally have
to be paid by you. For more information contact your nearest Supercheap Auto store.
The benefits to the consumer given by this warranty are in addition to other rights and
remedies of the Australian Consumer Law in relation to the goods and services to
which this warranty relates.
ASSEMBLY INSTRUCTION WB7801
1
2
3
4
5
6
7
8
9
10
13
ILLUSTRATION A.
PLEASE NOTE THE ANGLE OF THE
BOLT HOLES ON HANDLE AND WEDGE
ILLUSTRATION B.
ACCESSORIES(CHECKLIST):
1)TRAY:1PCS
2)TRAY BRACKETS:2PCS
3)STEEL HANDLE:2PCS
4)LEG BRACE:1PCS
5)LEG:2PCS
6)AXLE BRACKET:2PCS
7)AXLE:1PCS
8)NOSE GUARD:1PCS
9)TRAY BRACE:2PCS
10)WEGES:2PCS
11)BOLTS&NUTS:12PCS
12)LOCK WASHER:12PCS
13)PNEUMATIC WHEEL:1PCS
PRE-ASSEMBLY
You will need a regular slotted screwdriver and a
wrench either box or open end or an adjustable
type,Although not necessary ,a pair of sawhorses
would be help full.A flat,level,clan assembly-
area is recommended.and we suggest all loose
bolts,nuts and washers be placed in a small con-
tainer during assembly.
ASSEMBLY
1.Place both handles(3).both wedges(10),and
plastic pad(2)on the bolt holes as shown in the
illustration A.
2.Place the tray(1)on the top of the plastic pad
/handle as shown in the diagram and align the bolt
holes with the corresponding holt boles in the
wedge/handle assembly.Insert one(11)bolt
through each of the front holes and one(11)
bolt through each of the rear holes.
3.Assembly the legs(5)on the bolts protruding
though the bottom of thr handles,and loosely
attach eith a lock washer and nut on each bolt
4.Engage leg brace(4) into slot on leg (L)and
rotate 1/4 turn to lock as shown in illustration
B.repeat procedure on the other side.
5.Attach the nose guard(8)to the outside of the
front of the handles using 2pieces of (11/12)
lock washers,and nuts.
6.Attached the top half of the 2 tray braces(9)to
the front of the tray as illustrated ,using 2 pieces
of bolts,lock washers,and nuts(11/12).
7.Insert the axle(7)through the wheel(13)
mount one axle bracket (6) on each end of th
axle.Hold this assembly in position under the
handles to make sure the holes align,if not
reverse the axle bracket left to right.
8.To attach the axle brackets(6)to the hand
insert 4 piecesof (11/12)bolts through the xx
in the top of the handles.Note that two of the(
/12)bolts will placed through the bottom x
holes of tray braces(9)(step 6)Assemble the
wheel/axle/axle bracket(step 7)X
bolts protruding from the bottom of the handX
using lock washers and nuts
9.TIGHTEN ALL NUTS SECURELY!
Summary of Contents for 131353
Page 1: ......
