56
Note
1� Please only use this function at room temperature so that the correct base resistance can be displayed in Lock
mode�
2� When you exchange the coil, the battery “saves” the set resistance� This can increase if the temperature increases�
If you change the coil in Unlock mode, the display will show “New coil up same down” and the coil resistance can
be reset� If you are continuing to use the same coil, press the “Down” button� If you are using a new coil, press the
“Up” button� Please unlock the resistance if you would like to use an atomizer head with a different resistance�
3� If you accidentally use conventional coils in TC or TCR mode that are not suitable for temperature controlled
vaping, or coils with a resistance greater than 1�5 ohms, the device will automatically switch to VW mode�
Adjusting the wattage in TC/TCR mode
The output power is between 1 and 85 W in TC and TCR modes� Press the Fire button 4x in quick succession to
adjust the wattage� You can set the wattage by pressing the “Up” or “Down” buttons�
Locking and unlocking the vaporizer resistance in TC/TCR mode
Simply hold down the Fire and “Up” buttons for two seconds in either TC or TCR mode to lock or unlock the base
resistance of the vaporizer� The “Lock” symbol will appear on the display� The “Ω” symbol will only appear again
when the vaporizer is unlocked�
SC iStick Pico 25 – Selection & Operating of the Modes
