2
2. SAFETY GUIDELINES AND MEASURES
2.1. Intended Use
PLEASE FOLLOW THESE INSTRUCTIONS AND SAVE FOR FUTURE.
LOOK AT NEAR TO THE LITHIUM LIFEPO4 BATTERY.
The battery may only be used for the purposes described in the operating
instructions.
Use for other purposes is considered improper use and has the invalidity of the
result in product guarantee. The manufacturer is not liable for damage caused by
faulty, improper use or improper use of the product. Use in aviation or in medical
devices that serve to support life contradict the intended use. LiFePO4 Batteries are
designed for use as energy storage. Possible areas of application for the battery are
used as a service and on-board battery in leisure vehicles or boat.
2.2. MARKINGS
Conformity mark (CE mark).
RoHS Conformity according to RoHS directive.
Conformity mark for material safety data sheet.
Fire, naked flames and smoking are prohibited! Sparking when handling avoid
cables and short circuits.
Not waterproof.
Dispose of the Lithium LiFePO4 battery in accordance with your local, state, and
local authority, federal laws and regulations. Batteries can be sent to the
manufacturer, can be returned. Do not mix with other (industrial) waste.
This product or parts of this product can be recycled.
The connections of the lithium battery are always live. Therefore, never place objects
or tools on the lithium battery. Avoid short circuits. Use isolated tools.
Do not wear metallic objects such as watches, bracelets, etc. on your body. Use ata
class D fire extinguisher, foam or CO2 fire extinguisher.
2.3. STORAGE AND TRANSPORT INFORMATION
The battery must be packed and protected well during transport.
The lithium battery must be transported according to the rules for transport, these
should always be followed (transportation code UN3480/UN38.3).
Never lift the battery by the terminals, only by the handles.
The battery should be stored in temperatures from -10
℃
to +30
℃
.
During transport, the battery should be about 50-60% charged.
The battery should be charged every three months to keep it active so that it always
works maximum.
2.4. DISPOSAL
Batteries that are marked with the recycling symbol must be returned to approved
recycling points. You can also contact the manufacturer by arrangement to be
returned. Batteries must not be disposed of in household or industrial waste.
2.5. IMPORTANT INSTRUCTIONS
Do not open the LiFePO4 battery without consulting the dealer. Unauthorized
opening of the battery voids the manufacturer's warranty.
▪ Only use the battery for the application for which it is intended.
▪ Do not short-circuit the LiFePO4 battery. The cable connections to the consumers
must go through a backup to be protected.
▪ Installation and maintenance may only be carried out by qualifiedspecialists.
▪ Do not expose to permanent direct sunlight. Protect from the effects of heat.
Temperatures above +60 ° C can damage the battery.
▪ Use only compatible chargers. The battery is in a longer storage of all disconnect
devices.
▪ Pay attention to proper assembly.
▪ Avoid damage of any kind, for example by falling, drilling, etc. (Risk of short circuit).
▪ Always keep the battery dry and clean.
▪ Note the plus (+) and minus (-) markings on the LiFePO4 battery and the device and
pay attention to the correct polarity.
▪ The cycle capacity may vary due to the change in the working temperature andthe
charge and discharge rate differ from the nominal capacity.
▪ Suitable for parallel connection. Before connecting, bring to the same charge level.
Batteries from different manufacturers or different types should not be
interconnected.
3. INSTALL THE BATTERY
Lithium LiFePo4 batteries are heavy. Make sure it is adequate and safe attached and
always use the appropriate transport equipment. In an accident unsecured, batteries
could become a projectile! Always take carefully with lithium batteries.
Make absolutely sure that the LiFePO4 battery is not connected with reversed
polarity. Should the battery be connected incorrectly, the BMS electronics will be
irreparably damaged and must be replaced with a new BMS board. This is not a
warranty case.
The battery models LFP-12V8AH or LFP-12V20AH or LFP-12V40AH is Not
designed in serial connections suitable! The battery model LFP-12V100AH is
acceptable for series connection, max 4 batteries (48V).
Disregard can lead to a defect!