SBJ AC-800 Pro User Manual Download Page 5

 

5

same or equivalent type. 

3. Attention should be drawn to the environmental aspects of battery disposal. 
4. To avoid battery leakage, remove batteries if it is not used for a long time. 
5. When the batteries are damaged, please disregard and dispose them with care. Do not 

dispose of the batteries to heat source to avoid explosion. 

 

Recharging Function 

 
Low Battery Alert 
When the battery level becomes low, the battery icon blinks twice in every second. When 
the battery is too low, the unit will power off automatically. Please change the batteries. If 
you use NIMH rechargeable batteries, please use supplied charging adaptor for charging. 
Please do not charge it over 8 hours or the unit may not function properly. 
 

Use charging adaptor for charging:   

      Connect the adaptor into socket and connect the charging jack hole (earphone jack) on   

the top of the unit, you can charge two units at the same time. Battery icon appears on 
the LCD when the unit is in charging. Battery icon disappears when the unit is fully 
charged after 8 hours. 

 

 
 
 
 
          Charging when unit is turned off              Charging when unit is turned on 

 
Note: 

  Please fully charge the rechargeable batteries before first time usage. 

 This is a danger of explosion or product damage if Alkaline batteries is placed inside 

battery compartment for charging. 

 Please use only the supplied 

rechargeable batteries

, AC/DC adaptors for charging, 

otherwise may damage the unit or may cause explosion. 

 

  When the unit is power on and charging, PTT and CALL key is not activate. 

 

Quick Start 

 

A

  Power On / Off 

1.    Power On: Rotate the power knob clockwise to turn on the radio, a click sound can be 

Summary of Contents for AC-800 Pro















Reviews: