Removing the SG-4 Rear Panel
The Rear Panel of the SG-4 must be removed to access the internal electronics. See Figure 1 for a photo
of the SG-4 Rear Panel.
Figure 1
In order to remove the Rear Panel of the SG-4, a number of things must be removed from the camera.
First, pull off the button cover from the Guide On/Off button (1).
Next, using needle-nose pliers, or similar, remove the nut from the Power In connector (2), and the I
2
C
and RS-232 port nuts (3).
Finally, remove the four Phillips-head screws from the corners (4).
