32
AllSky-340 Setup
The Serial3X devices have been setup to run at 115200 baud
over the wireless link. The devices are not capable of
communicating at any other baud rate. Thus the AllSky-340
must also be setup to communicate at 115200 baud.
•
Connect the RS-232 cable from the PC to the AllSky-
340.
•
Power on the AllSky-340.
•
Run the SBIG AllSky-340 software.
•
Click the Setup Serial Port… menu item.
•
Set the proper COM port number and select 115200
baud.
•
Click the “Test” button.
•
If the AllSky-340 software is able to communicate with
the camera (“Test successful!” window will show up), it
will set the baud rate in the camera to 115200 baud.
This will now be remembered even after power-off.
Final Steps
•
Turn off the AllSky-340.
•
Disconnect the RS-232 cable from the AllSky-340.
•
Connect the “Slave” Serial3X device to the RS-232
