SBI AC01214 Installation Instructions Manual Download Page 2

 

IMPORTANT: 

 

Read through all instructions before beginning your installation. It is 

important that you carefully follow the installation instructions. Failure to 

install this product as described in these instructions will void the 

manufacturer's warranty and may cause fire, injury or even death. Keep 

these instructions for future reference. 

 

Each vent system must be properly designed and installed to enable 

optimal performance and safety. Refer to the appliance manufacturer’s 

instructions to determine the requirements and limitations limitations with 

respect to installation and use of the appliance. It is the responsibility of 

the installer to contact local building  and fire officials concerning any 

installation restrictions and/or inspection  requirements that may apply 

when not specified in the appliance instruction manual. 

 

It is not recommended to add any other offset when installing this adapter. 

Doing so could influence the draft significantly and reduce the efficiency of 

your appliance.  The chimney system should have as little restriction  as 

possible. Once the installation is completed, your chimney should have a 

minimum  height  of 15  feet (4.5 m). Note that in order to ensure optimal 

draft,  it is possible that you need to add some extra lengths  to your 

chimney. 

 

 

 

IMPORTANT: The use of a firescreen is strongly discouraged when an offset 

is installed on the chimney system of an appliance. The restriction that the 

offset could cause increases the risk of smoke emanating from the door. For 

all other restrictions related to the installation of a firescreen, please consult 

the instruction sheet supplied with this option 

 

Summary of Contents for AC01214













Reviews: