Page 9/70
May 2015 I 2.0
1.3. GeoStar 200-Terminal
Figure 3 GeoStar 200 terminal
In Figure 3 all GeoStar 200 terminal
connections are numbered.
1. Radio connection:
coax small (TNC)
2. GPS antenna connector 1:
coax large
(N). Connection of the main antenna
(GPS 1).
3. GPS antenna connector 2:
coax large
(N). Connection of the second antenna
(GPS 2).
4. Main switch
5. Screen dimmer
6. Data transmission cable:
19-pin plug-
in/screw connector for the sensor box
7. Ethernet:
4-pin plug-in/screw connector
for 12V power supply.
8. CAN bus connection:
8-pin connector
9. External modem:
8-pin connector for an
external radio or UMTS modem
10. RS-232 interface:
17-pin serial plug-
in/screw connector for an external device
connection
11. Power cable:
4-pin connector for 12V
power.
12. External analogue terrain
compensation module connector:
7-pin
connector for the analogue terrain
compensation module on the implement
13. USB interface
14. Touch-screen:
operations are performed
exclusively via a colour touch-screen.
