Ellipse Micro AHRS & INS
– Quick Start Guide
ELLIPSEMQSG
Following instructions will help you to start quickly with your new Ellipse Micro Device.
Content of a development Kit
1.
A transport case
2.
This quick start guide
3.
An evaluation board with USB cable
Software Development Kit Installation
1.
Download the latest SDK from SBG Systems support website:
https://www.sbg-systems.com/setup
2.
Launch the Inertial SDK executable.
3.
Follow the instructions.
4.
Once Inertial SDK is installed, you can plug the USB cable on your computer with Ellipse
connected to it.
5.
When you first launch sbgCenter application and try to connect to your Ellipse (see
section “Connecting to Ellipse” below), a message will ask you to change FDTI USB
serial converter configuration (see Figure below). Please follow instructions to ensure
proper operation.
2/6
