Apogee Subsea
– Hardware Manual
APOGEESUBSEAHM.1.1
3.1.3. Origin of measurements
The Apogee offers the possibility to output data at different measurement points.
The default center of measurement is located on top of Apogee enclosure. It is represented on the
mechanical outlines by the symbol. This point is defined to simplify installation.
Alternatively, user can select between two other center of measurement points:
●
Alignment hole (aligned to the bottom of the base plate)
●
Bare IMU center of measurement, represented by the symbol.
3.1.4. Device label
SBG Systems manufacturing process is based on EN-9100 system with individual and full traceability of
every component and operation. Each Apogee is identified by a unique serial number that can be used to
trace all operations during the product lifetime such as manufacturing, calibration, tests and repairs.
In addition to a unique serial number, a product code is used to define exactly the device type and options.
Finally, the Apogee features an Ethernet interface and a unique MAC address is required to identify the
device on a network.
You can find on the back side of the Apogee a laser printed label that hold all these identification
information. This label also includes a data-matrix code that encodes the device unique serial number.
11/34
Figure 3.1: Apogee subsea device label sample
APOGEE
Subsea Motion Reference Unit
Made in France
Product code
Serial Number
MAC Address
APOGEE-M-G2A3-EL
050000100
98:5C:93:00:00:00
:
:
:
