Saia-Burgess Controls AG
Manual Q.PS-PEL-240x 24 VDC Power Supply Unit │ Document 27-646; Version ENG01 │ 2015-08-27
1-8
Safety measures
Installation
1
Installation
Safety measures before installation.
This equipment is to be protected against improper use. Components are not to be bent or
isolation spacing changed, especially through handling and transport.
The contact with electrical components and terminals is to be avoided. Always disconnect
the equipment from the mains supply, before commencing installation or wiring. The product
description, technical information in this data sheet and the marking on the equipment ratings
plate are to be observed.
Installation
Installation must be carried out according to the prevailing local conditions and safety regula
-
tions (e.g. VDE 0100) national accident prevention regulations (e.g. UVV-VBG4 or BGV A3)
and the generally accepted rules of technology. This equipment is a component designed for
installation into electrical systems and machines, and fulfils the requirements of the low volta
-
ge guidelines (2014/35/EU).
The required minimum spacing to neighboring components must be observed to guaran
-
tee the required cooling. When installed into machinery, the normal operation is forbidden
until it is determined that the machine fulfils the requirements of the machinery guidelines
(2014/30/EU). EN 60204 must be observed. The EMC requirements (2004/108/EG) must be
fulfilled before operation is commenced. The observance of the required limitations for the
EMC legislation is the responsibility of the manufacturer of the installation or machinery.
Disposal
WEEE Direc tive:
At the end of their useful life the packaging and
product should be disposed of by a suitable
recycling centre.
Do not dispose of with normal household waste.
Do not burn.
