Saia Burgess Controls
| 13
27-680 ENG02 – User's SW-Manual for the HMTL5 panels PCD7.D5xx
Open the System settings menu
3.10 Authentication
Enter in edit mode to change the authentication passwords.
3.10.1
x.509 Certificate
HMI Device use a self-certificate to encrypt the Internet communication trough the HTTPS
protocol. You can personalize the certificate with the data of your Company and ask to a
Certificate Authority to firm it.
The procedure to personalize and firm your certificate is:
1.
Enter in edit mode and fill the necessary parameters, then generate the new certificate
with your data.
2.
Export the “Certificate Signed Request”
3.
Sent the “Certificate Signed Request” to a Certificate Authority to firm it (general this is
a paid service)
4.
Import the signed certificate into the HMI device
3.10.2
Certificate’s parameters
Parameter
Description
Device Name
The name of your device
Organization
The legal name of your organization
Unit
The division of your organization handling the certificate
State
The state/region where your organization is located
Location
The city where your organization is located
Country
The two-letter ISO code for the country where your organization is location
Valid (days)
Validity of the certificate
Key Length
Number of bits of the key used from the cryptographic algorithm
3.11
Web Browser
Parameter
Description
On Startup,
open Settings page
After a restart of the device the setting page is displayed were you can enter
the setup menu or device configuration
On Startup,
continue were you left
After a restart of the device the last active page will be loaded. This setting does
not work for project having a runtime like the Web Editor 8 or supervisor and will
always start with the start page assigned for the project.
On Startup,
open homepage
After a restart of the device, the homepage is directly loaded
Selecting continue were you left or open homepage will now longer allow you to enter the
setup menu.
3.12 Exit
Exit from the System Settings.
