Page 20
PRODUCT MANUAL
Wireless DVR : SB-WDVR50
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
TESTING YOUR WIRELESS CAMERA
Before you make any changes to the
CHANNEL SETTINGS, you should test
your camera feed.
For a wireless camera, raise the antenna on
the right hand side of the DVR.
Make sure your wireless camera is on and
note what channel it is using.
Turn on your DVR. Note that you will want to MUTE the audio if you are not using your
ear buds. Do this by Quick-Pressing the M button.
Your DVR will show the first wireless channel. Use the Arrow keys to move to other
channels until you see your video feed, which should be on the channel you noted earlier.
If you see your camera, then you are ready to move on to the next step.
If you do not see your camera, be sure that your camera is on. Check the channels
displayed on the DVR while you press the Arrow keys. It should cycle through all 8
available channels. If not, you will need to activate those channels using the setup menu
shown in the next step.
Current Channel
Showing a feed from a wireless camera using Channel 3
