SB Acoustics Sasandu, User Manual

Page: 12 / 18

11 Sasandu | User Manual
Part List (each cabinet) :
1 pc
1 pc
2 pcs
1 pc
24 pcs
11 pcs
4 pcs
10 pcs
28 pcs
11 pcs
1 pc
1 pair
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pcs
- High frequency driver SATORI TW29BN-B-8 or (sold separately) TW29BN-8 ........
- Mid frequency driver 6.5" SATORI MR16P-4 or (sold separately) ..... MR16PNW-4
- Low frequency drivers 7.5" SATORI MW19P-8 or (sold separately) MW19PNW-8 ..
- Sasandu crossover kit (sold separately) ...............................................................
- Hex socket screw M4 x 20mm (for drivers) .........................................................
- Hex socket screw M5 x 30mm (for pedestal) .......................................................
- Countersunk screw M4 x 20mm (for terminal plate) ...........................................
- Wood screw 4 x 16 mm for crossover (from crossover kit) ..................................
- Insert nut M4 (Installed ) .....................................................................................
- Insert nut M5 (Installed ) ....................................................................................
- Stainless Terminal plate .......................................................................................
- Binding post .......................................................................................................
- Seal gasket (for terminal plate) ...........................................................................
- Seal gasket (for pedestal, installed on cabinet) ...................................................
- Port are (installed on cabinet) ..........................................................................
- Port paper tube (installed on cabinet) .................................................................
- Damping ..............................................................................................................
- Name plate .........................................................................................................
- Tweeter grille .......................................................................................................
- Midrange grille ....................................................................................................
- Woofer grille .......................................................................................................
Tools Needed:
- Hex key 3mm size (for driver screw).
- Hex key 4mm size (for pedestal screw).
- Hex key 2.5mm size (for terminal plate screw).
- Philips screwdriver no. 2 (for crossover screw).
- Hot melt glue gun(for attaching the damping and sealing the wire hole).