www.saxbylighting.com
Instruction manual
77914, 77916
Lucca Mini LED Bulkhead
Photocell Sensor (only for 77916)
- Rated load: 500W~850VA
- Operating Level: 10~20 Lux On, 30~60 Lux Off
- Operating Temperature: -40ºC - +70ºC
• This product is fitted with a photocell. The specification is as follows:
• It is normal for the sensor to take several minutes to turn off when the product is first installed. To test "turn on" during
daylight hours - cover the sensor with opaque material. The test will take approximately 2 minutes.
V3 06/06/2022
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
UK Manufacturer: BH17 7BY
Technical data
220-240 V~, 50 Hz
Supply
Voltage:
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
Care and Safety
This light source is protected by a shade. This part must be replaced immediately should the shade
become cracked or damaged. This fitting must not be used without the shade in place.
Replace Cracked Shade
Conformity with all relevant EC Directive requirements.
The power supply is Double Insulated and does not require connection to an Earth circuit.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is rated at IP65.
IP
65
This product is not suitable for dimming.
Conformity with all relevant UKCA Directive requirements.
For further information, please visit
https://www.lighting-info.co.uk/77914
Replaceable control gear by a
professional
Replaceable (LED only) light
source by a professional
Bulb
Type:
This product contains a light source of energy efficiency class
E
.
15W LED module (SMD), 4000K
