www.saxbylighting.com
Instruction manual
78646, 78647
Bodenn
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
Care and Safety
Technical data
220-240V~, 50Hz
Supply
Voltage:
Bulb
Type:
78646----1.3W LED module (COB), 4000K
78647----1.3W LED module (COB), 3000K
The power supply is Double Insulated and does not require connection to an Earth circuit.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is not suitable for dimming.
This product is rated at IP67.
IP
67
Conformity with all relevant EC Directive requirements.
Conformity with all relevant UKCA Directive requirements.
Wiring
You have correctly identified the wires.
The connections are tight.
No loose strands have been left out of the
connection block.
Check that...
NEUTRAL
SWITCHED LIVE
BLUE (N)
BROWN (L)
SUPPLY
LIGHT FITTING
For your safety, always switch off the supply before maintaining the system.
Having correctly identified the wiring from your existing light fitting, connect to the approved IP67 (or higher rated) terminal
block in the following way (recommended terminal block ref. 90131/90132)
These product contains a light source of energy efficiency class
F
.
For further information, please visit
https://www.lighting-info.co.uk/78646
V6 29/11/2021
EU Manufacturer:
Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
UK Manufacturer:
BH17 7BY
Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.
This LED's are protected by a plastic lens. The lens part must be replaced immediately should it
become cracked or damaged. This fitting must not be used without the plastic lens in place.
Replace Cracked Shade
Non-replaceable control gear
Non-replaceable light source
