Instruction manual
78959, 78960, 78961, 94061, 94062, 94063
Pacto Track
•
We recommend cleaning with a soft dry cloth. Do not use
solvents or abrasive cleaners as these could damage the
finish.
Care and Safety
Technical data
220-240 V~, 50 Hz
Supply
Voltage:
Bulb
Type:
Conformity with all relevant EC Directive requirements.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is Class 1, must be connected to earth.
•
Always disconnect the product from mains at least 10 minutes
allowing to cool down before any maintenance or adjustment.
•
For your safety, always switch off the power supply before cleaning.
Conformity with all relevant UKCA Directive requirements.
This product contains a light source of energy efficiency class
E
.
Non-replaceable control gear
Non-replaceable light source
For further information, please visit
https://www.lighting-info.co.uk/78959
V4 06/06/2022
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
UK Manufacturer: BH17 7BY
Slide the tab down, and rotate the product 90º to engage the connections in the track.
Locate the product in the track with the connections in the slot.
Allow the tab to slide back up and ensure that it is located correctly in the track slot.
Replace fuse or circuit breaker and switch on. Your light is now ready for use.
Fitting Units
www.saxbylighting.com
78959 / 78960 / 78961
--10W LED module (SMD), 4000K
94061/ 94062 / 94063
--10W LED module (SMD), 3000K
Minimum distance from lighted objects (0.5 metres)
0,5m
This product is suitable for dimming.
