ENGLISH
8
Auto Set Fan
Auto fan turns on the fan once control goes to Off Mode
to dry out the steam room. Fan will remain on for selected
time. You may adjust the time from 0 - 24 hours with
15minute intervals. Auto fan is activated only when the
animated Auto button is displayed on the screen.
Software Version
Software version has two parts, Interface Software
Version and the Controller Board Version.
LCD Contrast Setting
You can adjust the contrast of the display between 0
and 100.
Factory Reset
Press the HeE RESET to remove heating element error
after checking or fixing the heating elements. If steam
generator’s kW is changed, press reset button instead.
Pressing the RESET button will revert all settings to
factory default. This is used when there is a malfunction
on the machine or you wish to clear previous settings.
Factory reset does not reset on hours and kWh counters.
Save and EXIT
Once everything has been set, you may press SAVE
to save all the setup or ESC if you wish to abort the
settings.
01:15
