24
4.6 Door Sensor (Optional)
In other than household use, it is recom-
mended to install door sensor. The door
sensor disables all pre-run operations if the
door is opened while the pre-run count-
down is active.
The door sensor also ensures that the door
is not open for long periods of time when
the heater is on. If the heater is on and the
door is open for more than 15minutes, an
alarm and “DOOR” will be displayed to warn
the user. The heater will be switched off
automatically.
4.7 Fan (Optional)
The fan function can only be activated if the
fan feature is present on the control unit.
Ensure that the fan motor to be controlled is
either shaded pole or permanent split
capacitor motor. The maximum power
is100W with 230 VAC.
4.8 Dimmer (Optional)
It is possible to use any suitable lamp of your
choice in the sauna room. However, if the
dimmer feature is present on the control unit
and wished to be used, only incandescent
lamp is suitable.
Note!
If door sensor is not installed, “Door switch”
terminals(D-D) must be connected with each
other by a jumper wire. See figure 1. Note,
connection is not present in the drawing.
