Sawgrass Technologies, Inc. ~
www.sawgrassink.com
6
Tips for Successful Sublimation
POLYESTER FABRIC
Maintain appropriate heat press times.
• Shortened pressing times will result in good surface color but the sublimation
dyes will not completely penetrate the polyester fibers. This leaves the dyes
more susceptible to wash out.
• Longer pressing times will cause the dye molecules to penetrate deeper into
the fiber, creating a washed out look. For guidelines on transfer times, see the
Section
entitled
Heat Transfer Instructions, page 35
.
Maintain appropriate heat press temperatures & pressure
• The correct temperature setting is vital for achieving desired results. Higher
temperatures can damage the polyester fibers to the point that they cannot
properly
“hold”
the dyes. For guidelines on transfer temperatures, see the
Section
entitled
Heat Transfer Instructions, page 35
.
• Too much pressure on the heat press may cause the dyes to penetrate too
deeply into the fabric causing a washed out look. For guidelines on transfer
pressure see the
Section
entitled
Heat Transfer Instructions.
METAL
To obtain the best results when printing onto metal, place the transfer between the
metal and an absorbent cloth or fresh, non-textured paper towel. This will absorb
any dyes that pass back through the paper and any moisture released during the
transfer process. If you have problems with inconsistently filled areas, this may
alleviate the problem.
CERAMIC TILES & MUGS
When transferring onto ceramic tiles and mugs, immediately peel the paper off of
the ceramic after removing it from the heat press. Once the paper has been removed,
cool the ceramic by submerging it in cool water, or run water over it from the faucet. If
paper residue remains on the surface of the ceramic, clean with citrus cleaner. If you
experience a significant paper-sticking problem, call your SubliJet reseller for assistance.
