■ Precautions regarding the installation of the refrigerator
1) Make sure to install the product horizontally.
When installing in the Vehicle or Boat, make sure the product does not install an unstable place.
2) Make sure to install the product where the air flow is available.
If the Machine parts air flow contaminated, the cooling system will degrades.
3) Avoid from direct Sunlight, Stove, or anything related to heat.
If you install the product near a gas stove, a heater, any other heat-generating appliances or place in
direct sunlight, the cooling performance is deteriorated. And there is a risk of discoloration or deformation.
4) Avoid installing the product close to a kitchen sink or water faucet.
Easily with the dew on the outer case and inner case and then installed in wet locations.
If installed in locations subject to water will damage the electrical circuits and other.
■ How to install the refrigerator
＜Moving the compressor unit＞
The compressor unit of this refrigerator can be placed in four different locations.
<Dimensions when the mechanical part is placed separately>
Please note that the length of the pipe varies depending on the position where it is placed separately.
2. INSTALLING A REFRIGERATOR
4
Machine part center position
(Factory position)
Installation on the left
side of the machine
Installation on the right
side of the machine
Separate
installation of
mechanical parts
