8
9. ATTACHING THE FAN
BLADES
Caution:
Remove 5 rubber packing mounts
and discard before installation.
Step 1.
Attach the blade to the blade
bracket using the screws and fiber washers
as shown in Figure 17. Start screw into
bracket. Repeat for the two remaining
screws.
Step 2.
Tighten each screw. Make sure the
blade is straight.
Step 3.
Fasten blade assembly to motor
using the screws supplied. (Fig. 17)
Figure 17
Figure 18
10. INSTALLATING THE
MOUNTING PLATE
1. Remove the 1 of 3 screws from the
mounting ring and loosen the other 2
screws. (Do not remove)
2. Place the key holes on the mounting
plate over the 2 screws previously
loosened from the mounting ring, turn
mounting plate until it locks in place at
the narrow section of the key holes.
Secure by tightening the 2 screws
previously loosened and the one
previously removed. (Figure 18)
Screws
Blade
Blades bracket
Screws
Fiber
washers
Mounting
plate
Mounting ring
Screws