8
Figure 15
Figure 16
10. INSTALLING THE
LED LIGHT KIT
NOTE:
Before starting installation, discon-
nect the power by turning off the circuit
breaker or removing the fuse at fuse box.
Turning power off using the fan switch is
not sufficient to prevent electric shock.
Step 1. Remove the 1 of 3 screws from the
mounting plate and keep it for future use.
Loosen the other 2 screws (Do not
remove)
Step 2. While holding the LED light kit
under your fan, make the polarized plug
connections: (Fig. 16)
- Red to white
- Black to black
Step 3. Place the key holes on the LED
light kit over the 2 screws previously loos-
ened, and turn the LED light kit until it
locks in place at the narrow section of the
key holes. Secure by tightening the 2
screws previously loosened and the one
previously removed. (Fig. 15)
11. INSTALLING THE
GLASS SHADE
1. Raise glass shade up against the LED
light kit and secure it to fan by turning
glass clockwise until snug. DO NOT OVER-
TIGHTEN. (Fig. 16)
2. Restore power and your light kit is ready
for operation.
LED Light kit
Glass shade
Mounting plate
Connection plugs
LED Light kit
Screws
