EN
1
0
10
RECIRCULATION VERSION AIR OUTLET
To install the Recirculation Version of the hood, the optional Ac-
tivated charcoal cartridge kit must be purchased.
• Screw the filter cover onto the air outlet, using four screws
12c
(2.9 x 12.5).
• Fix the directional grille
8
on the recirculation air outlet using
the 2 screws
12d
(2,9 x 9,5) provided.
16
12c
12d
8
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.
Flue assembly
The chimney can only be installed with exhausting hood
• Fasten the angle iron
15
to the hood canopy using the screws
12d
(2,9 x 9,5) provided.
Upper exhaust flue
• Slightly widen the two sides of the upper flue and hook them
behind the brackets
7.2.1
, making sure that they are well seat-
ed.
• Secure the sides to the brackets using the 4 screws
12c
(2,9 x
6,5) supplied.
Lower exhaust flue
• Slightly widen the two sides of the flue and hook them be-
tween the upper flue and the wall, making sure that they are
well seated.
• Fix the lower part laterally to the hood body using the 2 screws
12c
(2,9 x 6,5) supplied.
Summary of Contents for C-6906
Page 1: ...C 6906 C 6908 Instructions Manual K ytt ohje Bruksanvisning...
Page 7: ...EN 7 7 Dimensions...
Page 18: ...FI 1 8 18 Mitat...
Page 29: ...SE 2 9 29 M tt...