Install Waterfall Weir
14
Place liner over the face of the
Waterfall Weir. Leave a moderate
amount of slack in the material.
Mark position of the weir opening by
rubbing the liner with a hard object such
as a screwdriver or a blunt scissor edge.
Cut away the liner to the shape of the
opening.
Next, install the remaining screws.
Tighten all screws evenly
by hand
, until
flush with the faceplate.
Attach liner bracket and liner to waterfall
weir by installing 4 screws into each
corner. (Front of seal has recessed screw
holes).
S T E P 7 – I N S TA L L W AT E R FA L L W E I R
3
4
5
6
Place the Waterfall Weir at the top of
the waterfall and level the unit front to
back and side to side.
2
7
Waterfall Weir
Connect plumbing and kink free hose to
back of Waterfall Weir. Use the included
hose clamp and a screwdriver to tighten.
1
