3
5
6
1
2
Operating Capacities
Tighten wing nut on float valve so the
valve rests at a 180
º
angle. Attach
the thin nylon nut on the outside of
housing to secure float valve.
Turn off water source. Attach self
tapping hose kit to water line.
(See instructions included with
hose kit.)
Mount the float valve inside the
Waterfall Well using the hole provided.
Connect hose to Water Leveler Kit,
using large nylon compression nut.
Turn on water source and monitor
water level to ensure float valve
is operating correctly. Start pump
to resume normal Waterfall Well
™
operation.
Float Valve
(KVMA252)
Assembly and Installation
The S
AV
i
O
Mechanical Water Leveler Kit is specifically designed to operate with the S
AV
i
O
Waterfall Well
™
This kit will provide a regulated flow of water to maintain optimal water
level and can be connected to copper, plastic or iron water supply lines up to 1” in diameter.
• Mini-Float Valve • Self Tapping Hose Kit
• Phillips Screwdriver • Crescent Wrench or Pliers
2
Self Tapping Hose
Kit (MM43265)
3
4
Attach hose to valve and tighten
compression nut.
COMPONENTS
TOOLS NEEDED