Other Print Operations
118
Caution During Printing
Collate
The Collate function allows you to print while sorting printouts into page-ordered
sets, such as when printing multiple copies of meeting materials.
❒
To use these functions, an optional memory unit of at least 256 MB or the op-
tional hard disk drive must be installed on the printer.
❒
Up to 150 pages can be sorted using RAM. If the optional hard disk drive is
installed, up to 1,000 pages can be sorted.
❖
Collate
Output can be assembled as sets in sequential order.
For details about collate, see the printer driver Help.
Spool Printing
With Spool Printing, the print data is saved in the hard disk before printing.
❒
Do not turn off the printer or the computer when a print job is being spooled
and the
Data In
indicator is blinking. The print job will remain in the hard disk
and be printed when the printer is turned on. The setting can be changed us-
ing the “spoolsw clear job” command on the telnet.
❒
The Spool Printing function is available for data received using lpr and ipp.
❒
The domain reserved for spool printing is about 1 GB.
❒
When Spool Printing is on, the size of a single print job cannot exceed 500
MB.
❒
When sending print jobs spooled from several computers, up to 10 lpr jobs,
and one ipp job, can be spooled. Jobs exceeding this spooling capacity can-
not be executed. It is necessary to wait to add new jobs.
❒
First page takes longer to print when using spool printing.
