Printing Functions
87
5
Reception Time
You can have the date and time print-
ed at the bottom of the message when
it is received. You choose whether
this feature is on with the Initial Setup
Reception Mode settings.
⇒
p.131
“Reception Mode”
Limitation
❒
When a received message is print-
ed on two or more sheets, the date
and time is printed on the last
page.
Note
❒
The date and time when the mes-
sage was printed can also be re-
corded on the message. If you need
this feature, please contact your
service representative.
2-Sided Printing
The optional Duplex Unit is required.
If this setting is set to on, fax messages
will be received with Memory Recep-
tion.You can have a received message
printed on both sides of the paper.
You can turn this feature on or off
with the Initial Setup reception Mode
settings. You can also print
⇒
p.131
“Reception Mode”
Limitation
❒
To use this function, all pages of
the received document must be of
the same size—inform the sending
party of this beforehand if neces-
sary. You must also have paper set
in your machine of the same size as
that sent by the sending party
(A4
→
A4, B4
→
B4 are typical exam-
ples, whether A3 and B5 sizes are
correctly scanned in will depend
on the fax machine). This machine
will correctly scan in landscape
A3, B4, A4, and B5; and portrait
A4, B5 and A5. The following table
shows the results that can be
achieved when sending and re-
ceiving using this machine.
❒
This feature works only when all
pages are of the same width and
are received into memory.
❒
The machine will use Memory Re-
ception for 2-Sided Printing.
RusC2FaxADEN-F_V4_FM.book Page 87 Monday, August 20, 2001 10:52 AM
