4
Guide To Components
1.
Platen cover (option)
Lower this cover over originals placed on
the exposure glass for copying.
2.
Main power switch
To start the machine, turn on this switch.
Note
❒
If the machine does not operate after
turning on the operation switch, check
if the main power switch is turned on.
If it is off, turn it on.
3.
Copy tray
Completed copies are delivered here.
4.
Stopper
When you copy onto thin paper, raise
this to prevent curling.
5.
Paper tray
Set paper here.
⇒
P.154
“
B
Loading Pa-
per”
.
6.
Auto duplex tray
Use to make two-sided copies.
7.
Front cover
Open to access the inside of the machine.
8.
Operation panel
⇒
P.7
“Operation Panel”
.
9.
Operation switch
Press this switch to turn the power (on
the
On
indicator goes on). To turn off the
power off, press this switch again (the
On
indicator goes off).
10.
Exposure glass
Position originals here face down for
copying.
Zcmh010e.eps
Summary of Contents for Copier SDC326
Page 12: ...2 What You Can Do with This Machine Tlcx301n eps...
Page 13: ...3 eps...
Page 112: ...Copying 102 2...
