Attach on all 4 profiles (f ) the 4
corner pieces (h).
Slide the 2 side panels (o) in the
vertical profiles (k).
Make sure that the closures are
facing outwards and the panels
are well placed in the corner
pieces (h).
Slide the back panel with hooks
(q) in the vertical profiles (k).
Make sure the hooks are facing
upwards and the vertical wires
of the panel are on the outside .
Turn the cage 180 ° and slide
the front panel with hooks (n)
in the profiles.
Make sure that the closure of
the door is facing
outwards.
Insert 4 x g in every platform
(b). Place the first platform left
back: knobs between wire 12
and 13, height 13.5 cm or 5 ¼
inch as shown in 5 c.
Do not tighten the screws (f )
too strongly.
Repeat as indicated in figures
5a, 5b & 5c and place the 2nd
platform right front: knobs
between wire 35 and 36, height
37.5 cm or 15 inch, as shown
in 6.
1
2A
2B
3A
3C
4A
4B
5C
5A
5B
6
A
A
O
K
H
Q
G
B
F
