NOTE
If you don't have remote call control through a lifter (HL10) or cable (EHS), manually remove
desk phone handset before each call.
2
Dial a call using your desk phone.
3
To end the call, press the headset call button and hang up the handset.
Alternatively, you can place an outgoing call by pressing your headset call control button, then
dialling from your desk phone if the desk phone is the default line.
Place a mobile phone call
1
While wearing your headset, short press the base mobile button.
NOTE
If you place the mobile phone call without pressing the base mobile button first, the audio will
stay on the mobile phone. If you would like to transfer the audio to your headset, short press the
mobile base button.
2
Dial a call from your mobile phone.
3
End the call by pressing the headset call control button.
Hands-free dialling
To enable hands-free dialling, install the Plantronics software. Once installed, go to Start >
Programs > Plantronics > Plantronics Control Panel > Device Settings > Base and activate Initiate
mobile voice commands. For hands-free dialling, initiate the mobile call from the base by
pressing the base mobile button. Your mobile phone will prompt you for voice commands.
Alternatively, you can dial a number from your mobile phone and then press the base mobile
button to move the audio to the headset.
Place a softphone call
1
While wearing your headset, short press the base computer button.
2
Dial a call from your computer softphone.
3
End the call by pressing the headset call control button.
22
